 |
| VTA-SN-3PT: USD36.00 |
Very often, somehow or other, we may have to change cartridge for our Rega turntable. And if we happen to use a different cartridge, there is bound to be a change in VTA. To solve the problem, usually VTA spacers are added to correct the VTA. However when this is done, the tonearm is raised higher and there is hardly any thread left below the plinth for the stock hex nut to secure the tonearm to the plinth properly.
To solve this problem, I have thus designed a new sleeve nut for replacing the stock hex nut. This hand sleeve nut is handy and easy to use. It can be fastened by hand instead of using the messy big spanner which is hard to estimate the degree of tightening. So there is no need to worry about overtightening which can affect the sound of your turntable.
As we know, any micro movement in tonearm could affect the sound produced. In order to minimize this micro movements, the tonearm could be further weighed down with a heavy tonearm stabiliser.
When tonearm stabiliser is used, it can be secured to the sleeve nut by using three steel screws with the help of an Allen key.
This upgrade is for you if you do encounter the above problem.
Enjoy more analogue music!
0 comments:
Post a Comment