 |
| Triple pulley (33.3/33.3/33.3 rpm) DP3-50 (50Hz) - USD60.00 |
 |
| Triple pulley (33.3/33.3/33.3 rpm) DP3-60 (60Hz) - USD60.00 |
Hi Michael,
I ordered a 3 belt pully a while ago, with work didn't have much of a chance for "tweek'n". I finally got around to making the switch and I must say it really is a worthwhile tweek. As you may recall I needed a 50hz. Pully to replace my 60hz. because the psu was set for 50 not 60. With new belts, psu and ML triple pully rythim and dynamics is right on time! Top notch quality!
Thanks again for your help and fine products,
Kevin
Jacksonville FL, USA
1 comments:
New here, but VERY interested in either this pulley or the dual pulley. I have a Planar 3 so i believe either pulley should work? However I do also have the Neo PSU which is rated for 60hz, so my understanding is I should order the 60hz version? And silly question I know, but I will still be able to use 45's because I am using the Neo PSU? I also have a Groovetracer Subplater installed, so I'm unsure if id be able to utilize all 3 belts? Last question, with the puller I'm sure removal is easy but how is installation? does it simply "push" on, and does it bottom out? In other words, do I need to "center" the pulley or does it simply push on. Thanks! (sorry for all the questions)
Post a Comment