As we know tonearm needs a heavy base to coupled it properly to the plinth to prevent micro-movements. This new tonearm stabiliser which weighs in excess of 300gm is a new upgrade for you.

1. Model TAS-3-Point - USD38.00
2. Model TAS-Hex - USD35.00

It is easy to install : Just attach to the tonearm base, thus proving a stable anchor for the tonearm.

1. For traditional hex nut mount Rega tonearms models: RB250/300/600

2. For all models 3-point mount tonearms including latest 2016-2018 Planar tonearms

Read Users' Comments ( 0 )

Upgrading P25? Any difference before and after ? Let's see what Gerard of Singapore has to say :

Hi Michael, Glad I followed your advice of upgrading my P25 instead of replacing it with the new Regal Planar 6. Saved a lot of money and got a so-much-improved soundstage after installing your upgrades - more defined treble and mids, tighter bass and a pleasant to listen soundstage where previously it was slightly muddled. I had last year installed your sub-platter and adjustable footers and replaced the belt with Rega’s white. There was a big improvement especially after the sub-platter upgrade. The most recent upgrades were the counterweight, vta adjuster, bearing hub and pulley and what a difference it made to the sound. To be honest, there wasn’t much of an improvement after first installing the counterweight. It was only after installing the pulley and bearing hub, waiting a day for the sub-platter to settle, did I notice the big change. Have recently replaced the glass platter with a delrin, and the sound improved even further. Im enjoying listening to my LPs now. I’m going to replace the motor next with Rega’s 24v and the Exact 2 cartridge with a Dynavector 20X2L. Cant wait to hear even more difference in the sound! Here are some pictures of the upgrades. Thanks! Cheers, Gerard

Thanks, Gerard!

Read Users' Comments ( 0 )

Kevin's commented on his triple pulley upgrade
Hi Michael,
I ordered a 3 belt pully a while ago, with work didn't have much of a chance for "tweek'n". I finally got around to making the switch and I must say it really is a worthwhile tweek. As you may recall I needed a 50hz. Pully to replace my 60hz. because the psu was set for 50 not 60. With new belts, psu and ML triple pully rythim and dynamics is right on time! Top notch quality!

Thanks again for your help and fine products,
Kevin
Jacksonville FL, USA

Read Users' Comments ( 0 )

Turning an old Planar 3 into new and beautiful turntable is what Vesa of Finland has done. Here's his feedback and nice pictures. Enjoy!

Hi Michael, I now have done on my old planar 3 almost complete rebuild with most parts from you and the result is superb! Basicly the only std Rega part now is lid, before your parts there was already 24v motor kit, Origin Live silver mk3 arm, goldring 1042 cart and ttpsu with linear psu. Started with dual pulley and adjustable feets. Speed stability and sound was noticeable better than before. Next stop was top and bottom bracings and bronce bearing. Sound after this was more open and detailed. And onwards we go, motor isolation platform was next, this lowered the backround noise and gives chance to play with belt tension. Last bit, at the moment anyway, is skeletal acrylic plinth and that really glued it all together. Sound is much better, than old planar3, it's now a proper turntable, that sounds very good! Some pics attached: Thanks very much!! Vesa

Thanks, Vesa!

Read Users' Comments ( 0 )

Mr. Yap of Kuala Lumpur Malaysia has added the Disc stabilizer to his other Rega upgrades. Here's his feedback and pictures of Disc stabilizer in action!

Hi Michael, The S/S Disc stabilizer sounds lower noise and smoother the mid and high with good detail, tightly bass All my old records from years 70 to 2000 sounds better. Also 90 grams to 110 grams vinyl sound great. 180grams sounds better with out the disc Stabilizer. Great work Micheal. Yes I do like the disc Stabilizer alot it make my old records sound wonderful!

Thanks, Yap!

Read Users' Comments ( 0 )