Clif liu's Counterweight upgrade ...


Clif's first upgrade on his RP3 TT was underslung counterweight. Though many would choose to upgrade the stock plastic pulley or subplatjer first, I would say counterweight was the right choice too. Hearing is believing, you would be amazed to see the sonic improvement!




Clif's report after the underslung counterweight upgrade:


Hi Michael, 

I have been listening to the counterweight for a few weeks and have the following report. 

I have a Rega RP3, which has a RB303 tonearm. I don't know if the counterweight sleeve would have fit on the Rega endstub, but I decided to use the new end stub for the precise VTF adjustment. To remove the end stub I first removed the arm from the table to protect the bearing. I then wrapped both the end stub and the armtube with many layers of masking tape and twisted off the end stub by hand. I didn't use WD-40, figuring that the connection would not have corroded in the 2 years I've owned the turntable. The old end stub came out with some effort and the thread was not smooth. I was able to screw in the new end stub with some effort taking care not to cross thread the stub. 

I have an old Dynavector DV10x4 Mk 2 cartridge, which weighs 4.6 grams according to the manufacturer. I was able to use the weight without the addtional 9.5 gram screw. Getting the weight in the right place was a chore. I wanted to be fine adjust the tracking force from 1.7 to 1.95 grams, which is the higher range of the 10x4's 1.5 to 1.9 gram range. After a few tries I managed to lock in the weight so it was at the right position and angle. 

Of course now I had to fine tune the VTF and VTA. The 4.5g screw made this very easy. A turn is about the resolution at which I could hear a difference. I raised the VTF until the bass sounded bloated and the highs lost detail. Then I backed it off a half turn. I dropped the VTA from 3.5 mm to 3 mm (I'm using spacers) and the sound became dull, so I stayed with a VTA of 3.5 mm. At these settings the sound from the cartridge becomes quite magical. 

Quick note on my system. I am running an Antique Sound Labs tube phono preamp into a Bottlehead 2A3 power amp and Unity RS Desktop speakers. It's a flea-powered fast system with little bass. I listen to classical mainly. 

With these settings I'm noticing that the overal resolution of the system has increased significantly. By comparison, the old setup was muddled. All instruments now were distinct and separate whereas before they were somehow stuck together. The bass became much better too. The timpanis packed a wallop, but I could now feel their texture too. Imaging improved as well. The instruments were spread between the speakers, and each instrument had its own location instead of being vaguely in a certain area. 

I think the biggest improvement came in when the music became complex and loud. Here somehow the RP3 manages to stay relaxed and is able to pick the pieces apart. 

This is my first upgrade (except for the VTA spacers). I'm not entirely happy with my setup yet, but the counterweight was a huge improvement. 

Clif 


Thanks ,Clif !


0 comments:

Related Posts Plugin for WordPress, Blogger...